Licensed Heating Repair · Southern California

Heating Repair in the Inland Empire & Surrounding Areas

Fast, licensed heating repair for homes and businesses.

When your heat quits on a cold night, you need a licensed technician who shows up, finds the problem and fixes it right. Medrara HVAC repairs furnaces and home heating systems in 26 cities across the Inland Empire, San Gabriel Valley, north Orange County and Long Beach, and you approve the price before any work begins.

  • Licensed · CA LIC# 1042958
  • Upfront pricing
  • All major brands

Call between 8 AM and 8 PM, or email any time and we’ll get back to you.

Licensed Medrara HVAC technician repairing a home heating system during a heating repair visit
Next-day appointments
Upfront pricing You approve the price first.

Symptoms & Fixes

Common Heating Problems We Diagnose & Fix Fast

Not sure what is wrong with your heating? Match your symptom to the likely cause and see exactly what our licensed technicians do to fix it, from the Inland Empire to the San Gabriel Valley, north Orange County and Long Beach.

Call today

Heater Not Working

Not heating the house

Likely cause
A dirty filter, a failed ignitor or flame sensor, a thermostat problem, or a tripped breaker.
What we do
We test the thermostat, ignition, gas and electrical supply, then replace the failed component and confirm steady heat.
Call today

Furnace Blowing Cold Air

Running but blowing cool

Likely cause
The burners are not staying lit, a dirty flame sensor or filter tripped a safety limit, or the thermostat fan is set to on.
What we do
We check thermostat settings and the burner sequence, clean or replace the sensor and restore warm airflow.
Call today

Furnace Won’t Turn On

No response from the system

Likely cause
A tripped breaker, dead thermostat, blown fuse, or a failed control board, ignitor or safety switch.
What we do
We trace power and control signals from the panel to the furnace and replace the failed electrical or safety component.
Call soon

Furnace Short Cycling

Turns on and off repeatedly

Likely cause
A dirty filter, overheating from poor airflow, a bad flame sensor, or a faulty thermostat.
What we do
We watch the heating cycles, find what is shutting the furnace down early, and correct it.
Call today

Loud or Strange Furnace Noises

Banging, squealing, rattling

Likely cause
A failing blower motor or bearings, loose panels, dirty burners, or delayed ignition. Loud banging at startup means shut it off.
What we do
We pinpoint the source, then clean, tighten or replace the worn part before it damages other components.
Call soon

Uneven Heating

Hot and cold rooms

Likely cause
A clogged filter, blocked or leaky ducts, a weak blower, or a thermostat in the wrong spot.
What we do
We check airflow room by room, repair the restriction or leak and balance the system.
Call today

Burning Smell From Furnace

Odors when the heat runs

Likely cause
Dust burning off at the first start of the season is normal. A smell that persists can mean an overheating motor, a dirty burner or an electrical fault.
What we do
We inspect the burner, blower and wiring and repair the source. If you smell gas, leave the home and call your gas utility first.
Schedule a checkup

High Heating Bills

Bills climbing, comfort not

Likely cause
A dirty filter or burners, leaky ducts, a failing blower, or an aging system that works harder for less heat.
What we do
We run a full performance check, clean and repair what is wasting energy, and advise on efficiency upgrades.

Seeing something else? Describe it to us and we will diagnose it.

The Repair Visit

What a Heating Repair Visit Looks Like

Four simple steps from your call to a warm home, with no surprise bills.

Medrara HVAC technician repairing a home heating system during a heating repair visit
Licensed techniciansCA LIC# 1042958 Next-day appointments
  1. 1

    Call or Schedule

    Call (909) 343-8847 or request a visit. We give you the earliest arrival window, with next-day appointments available.

  2. 2

    Diagnose the Real Cause

    We check the thermostat, ignition, safety controls, electrical parts and airflow to find exactly why your heat failed.

  3. 3

    Approve an Upfront Price

    We explain the problem and your options, and you approve the price before any work begins.

  4. 4

    Fixed on the Spot

    We repair it during the visit when the part is on the truck, then confirm your heat is running properly.

Repair or Replace?

Repair or Replace Your Furnace?

Three rules of thumb our technicians use on furnaces and heating systems, plus a quick age check to point you in the right direction.

  • Age: 15 to 20 years

    Most furnaces last about 15 to 20 years. Past that range, repairs buy less time, parts get harder to find and efficiency keeps slipping.

  • The 50% rule

    If a repair costs more than about half the price of a new furnace, replacement usually makes more financial sense.

  • Cracked heat exchanger

    A cracked heat exchanger can leak carbon monoxide and is a safety risk. It is the one repair that usually points straight to replacement.

Quick age check

How old is your furnace?

Likely repair

Repairing is usually the smart move. Check whether any parts warranty still applies before you pay for a fix.

Compare both

Use the 50% rule. A single, smaller repair such as an ignitor or sensor is worth making. A major one deserves a side-by-side price for a new furnace.

Lean replace

A big repair such as a blower motor or control board rarely pays off now. Ask for both prices and weigh the energy savings of a new unit.

Likely replace

Replacement is usually the better investment. Older furnaces lose efficiency, parts are harder to source, and a cracked heat exchanger means replacement.

Leaning toward a new system? See what installation includes, or call and we will give you an honest repair-or-replace opinion.

Heating Repair Near You

Heating Repair in 26 Cities Across the Inland Empire, San Gabriel Valley & Orange County

Looking for heating repair near you? Medrara HVAC repairs furnaces and heating systems for homes and businesses in 26 cities across Los Angeles, San Bernardino, Riverside and Orange counties, from Pomona, Ontario and Corona to Anaheim and Long Beach. Choose a county, pick your city and open its local HVAC page.

  • 26 cities in 4 counties
  • Next-day appointments
  • Upfront pricing
  • CA LIC# 1042958

Pick a city to zoom the map

26 All service areasHeating repair across 4 counties: the Inland Empire, San Gabriel Valley, north Orange County and Long Beach

Heating Repair in Los Angeles County10 cities

Heating repair across the San Gabriel Valley and Long Beach, from Pomona, Diamond Bar and West Covina to Glendora and Azusa.

Heating Repair in San Bernardino County9 cities

Heating repair throughout the Inland Empire, from Ontario, Upland and Rancho Cucamonga to Fontana and San Bernardino.

Heating Repair in Riverside County3 cities

Heating repair in western Riverside County for homes and businesses in Corona, Eastvale and Moreno Valley.

Heating Repair in Orange County4 cities

North Orange County heating repair in Brea, Yorba Linda, Fullerton and Anaheim.

Don’t see your city? View all service areas

Showing: Our heating repair service area

Heating repair in 26 cities across 4 counties Licensed heating repair technicians, next-day appointments and an upfront price you approve before any work begins.

Heating Repair FAQ

Heating Repair Questions, Answered by Our Technicians

What heating repair costs, why your furnace is not heating, blowing cold air or short cycling, what to do about gas smells and carbon monoxide, when to repair or replace, and how to book next-day service across the Inland Empire, San Gabriel Valley, north Orange County and Long Beach.

Booking & Trust6 questions

How much does heating repair cost?

The cost of a heating repair depends on what failed, the part it needs and how much labor the fix takes, so there is no honest flat price over the phone. A licensed technician diagnoses the problem first, explains what is wrong and your options in plain English, and gives you the price before any work begins. Call (909) 343-8847 or email Contact@medrarahvac.com to get started.

Will I know the price before the heating repair starts?

Yes. After your technician finds the problem, they explain it and your options and give you the price. You approve it before any work begins, so there are no surprises on the final bill.

Do you offer next-day heating repair appointments?

Yes. We offer next-day heating repair appointments when available, and we give you the earliest arrival window when you call. Phone lines are open from 8 AM to 8 PM at (909) 343-8847, and you can email Contact@medrarahvac.com any time and we will get back to you.

Are your heating repair technicians licensed?

Yes. Medrara HVAC is a licensed California contractor, CA LIC# 1042958. You can confirm it in a few minutes on the CSLB Check a License page by searching our license number. Our technicians inspect your system, explain what they find in plain English and go over your options before any work begins.

How do I schedule heating repair near me?

Call (909) 343-8847 between 8 AM and 8 PM, or email Contact@medrarahvac.com, and tell us your city and what your heater or furnace is doing. Not sure what is wrong? Match your symptom in our common heating problems section, then see what a heating repair visit looks like.

Which cities do you provide heating repair in?

We repair home heating systems in 26 cities across four counties. Los Angeles County: Pomona, Diamond Bar, Walnut, West Covina, Covina, San Dimas, La Verne, Glendora, Azusa and Long Beach. San Bernardino County: Chino, Chino Hills, Ontario, Upland, Rancho Cucamonga, Fontana, Colton, Loma Linda and San Bernardino. Riverside County: Corona, Eastvale and Moreno Valley. Orange County: Brea, Yorba Linda, Fullerton and Anaheim. See the heating repair service areas on this page or all service areas. If your city is not listed, call us and we will let you know whether we can help.

Common Problems6 questions

Why is my furnace running but not heating my home?

The most common causes are a dirty filter that restricts airflow, a thermostat problem, a failed igniter or flame sensor, or a part that has shut the burner down for safety. Check that the thermostat is set to heat and above the room temperature, and replace a dirty filter. If the house still stays cold, turn the system off and call us. Browse more common heating problems.

Why is my furnace blowing cold air?

Cold air usually means the burner is not staying lit, which can come from a dirty flame sensor, an ignition problem or a safety switch that keeps shutting it down. It can also happen when the fan is set to ON instead of AUTO and runs between heating cycles. Set the fan to AUTO and check the filter. If the air stays cold, call us.

Why won't my furnace turn on?

Common causes are a tripped breaker, a thermostat with dead batteries or the wrong setting, a blown fuse or switch at the furnace, or a failed igniter or control board. Check the thermostat and breaker once. If it still will not start, do not keep resetting it. Call us.

Why does my furnace keep turning on and off?

Short cycling can come from a dirty filter, a poorly placed or faulty thermostat, a flame sensor that needs cleaning or an overheating system that trips its limit switch. It wears out parts and raises your energy bills, so it is worth fixing soon.

Why are some rooms colder than others?

Uneven heating usually comes from a dirty filter, closed or blocked vents, leaky or poorly balanced ductwork, or a blower that is not moving enough air. Make sure vents are open and unblocked and replace a dirty filter. If rooms stay uneven, a technician can find where the airflow is being lost.

Why is my heating bill so high?

A heating system that works harder than it should wastes energy. Common culprits are a dirty filter, worn or failing parts, leaky ducts, short cycling and an aging system. If your bills climb without a change in how you use your heat, schedule a repair visit so we can check for the cause.

Smells, Noises & Safety6 questions

Why is my furnace making banging, rattling or squealing noises?

A loud bang can mean delayed ignition, rattling usually points to loose panels or parts, and squealing or grinding often means a worn blower motor or bearings. Turn the furnace off if the noise is loud or continuous, because running it can damage other parts. Then call us.

Why does my furnace smell like burning?

A light dusty smell for a short time when you first turn the heat on for the season can be dust burning off. A smell that lasts, or one that smells like hot plastic or an electrical fault, can point to an overheating motor or wiring problem, so shut the system off at the thermostat and call us.

What should I do if I smell gas from my heater?

A rotten-egg smell means natural gas may be present. Do not use switches, lighters or your phone inside. Leave the home right away and call your gas utility or 911 from outside. Do not go back in until it has been cleared as safe.

Can a broken furnace cause carbon monoxide?

Yes. A cracked heat exchanger or a blocked or damaged vent can let combustion gases, including carbon monoxide, into your home. Keep working carbon monoxide alarms on every level and near bedrooms. If an alarm sounds, get everyone outside and call 911. Do not use the furnace again until a licensed technician has inspected it.

Why does my furnace keep tripping the circuit breaker?

Common causes are a failing blower motor, a short in the wiring, an electrical part that is drawing too much power or a worn control component. Resetting the breaker again and again is a safety risk. Leave it off and schedule a repair so we can find the electrical fault.

What can I safely check before calling for heating repair?

Make sure the thermostat is set to heat with fresh batteries, check that the breaker has not tripped, replace a dirty filter and confirm the vents are open. If the problem continues, stop there. Opening panels or handling gas lines, burners and wiring should be left to a licensed technician.

Repair, Replace & Upkeep6 questions

Should I repair or replace my furnace?

It depends on the system's age, how often it has needed repairs, its condition and the cost of the fix compared with a new system. A very old system or a repeat breakdown can make replacement the better value, while a newer system with one failed part is usually worth repairing. We explain your options and the price for each before any work begins. See our heating installation page.

How long does a furnace last?

Most furnaces last about 15 to 20 years, depending on the installation, how hard the system runs and how well it is maintained. Systems that run through long winters can wear out sooner without regular upkeep.

How often should I change my furnace filter?

Check your filter about once a month during heavy use and replace it when it is dirty. Many filters need changing every one to three months, depending on the type, your home and pets. A clogged filter restricts airflow and is one of the most common causes of poor heating and overheating.

Can my heating repair be finished in one visit?

Many repairs can be completed during the same visit when the technician has the part on hand. If a part needs to be ordered, we tell you before you decide, so you know what happens next.

Do you offer financing for a new heating system?

Larger projects, such as a new heating system installation, may qualify for financing through our partner Acorn Finance, subject to credit approval. Learn how it works on our HVAC financing page.

How often should I have my heating system serviced?

Most technicians recommend a tune-up once a year, ideally before the cold season starts. Regular HVAC maintenance helps catch small problems early, such as dirty burners, weak igniters, worn blower parts and clogged filters.

Scroll to Top